DIZHONBIM  —  Los Angeles
Scan
000
Studio Capabilities Workflow Projects Investment Start a Project
(626) 545-5094  ·  Info@dizhonbim.com
440 E Route 66, Glendora CA

Scan to BIM & LiDAR Scanning in Los Angeles

REALITY
CAPTURED.
MODELED.
DELIVERED.
Where light becomes architecture

We capture every surface of your building with precision under 5cm — then deliver a fully coordinated BIM model your team can build from. One workflow. One studio. 48-hour turnaround.

12+Years BIM Expertise
<5CMScan Accuracy
48HFirst Deliverable
LOD100–500Full BIM Range
ISO19650BIM Standard
Scroll
As-Built Documentation ◆ Point Cloud to BIM ◆ Clash Detection ◆ MEP Coordination ◆ LOD 100–500 ◆ Revit · IFC · DWG ◆ ISO 19650 Compliant ◆ VDC · Shop Drawings ◆ As-Built Documentation ◆ Point Cloud to BIM ◆ Clash Detection ◆ MEP Coordination ◆ LOD 100–500 ◆ Revit · IFC · DWG ◆ ISO 19650 Compliant ◆ VDC · Shop Drawings ◆
Studio

Craft, precision,
and 12 years of
knowing what matters

DIZHONBIM is a Los Angeles scan-to-BIM studio serving architects, general contractors, and MEP engineers across LA and Southern California. We specialize in one thing: taking the exact geometry of your existing building and turning it into accurate, construction-ready BIM models — fast.

With over 12 years of hands-on BIM experience and professional-grade LiDAR scanning capability producing over one million measured points per second, our Los Angeles-based scan-to-BIM workflow bridges the gap between the physical world and your digital deliverable.

We don't just scan buildings. We understand construction. Fewer errors, tighter coordination, and deliverables your whole project team can use from day one.

Autodesk RevitNavisworks AutoCADReCap Pro Professional LiDAR1M+ pts/sec LOD 100–500ISO 19650IFC Export
Professional Associations & Affiliations
AIA
NCARB
CAB
AGC
LEED
Capabilities

Scan to BIM services in Los Angeles

01

LiDAR Scanning & Point Clouds

High-density 3D scanning of existing buildings, construction sites, and infrastructure. Over one million measured points captured per second — every surface, every corner, in a single walk-through.

Indoor + OutdoorRCP · RCS · LAS · E57
02

As-Built BIM Modeling

Point cloud to Revit at LOD 100–500. Perfect for renovation projects, extensions, and facilities where no documentation exists. Delivered structured, named, and ready to use.

LOD 100–500Revit · IFC · DWG
03

MEP BIM Coordination

Mechanical, electrical, and plumbing systems modeled and coordinated in 3D directly from scan data. Identify spatial clashes before they become expensive on-site problems.

MEP SystemsLOD 350+
04

Clash Detection & Coordination

Full clash detection across architectural, structural, and MEP models using Navisworks. Coordination reports, issue tracking logs, and resolution support throughout.

NavisworksHard + Soft Clashes
05

Shop Drawing Production

Construction-ready shop drawings from your BIM model — fabrication drawings, connection details, and installation guides for steel, MEP, millwork, and glazing. ISO 19650 compliant.

Steel · MEP · MillworkISO 19650
06

Pre-Construction Scan & Estimation

Scan the existing site before construction begins — accurate, verified dimensions for reliable quantity takeoffs. Eliminate guesswork, reduce RFIs, prevent expensive surprises.

Quantity TakeoffRFI Reduction
07

Virtual Design & Construction (VDC)

BIM integrated into your entire construction process — 4D scheduling, 5D cost modeling, and digital coordination. A single source of truth before breaking ground.

4D Scheduling5D Cost ModelingBIM Execution Plan
08

High-End 3D Rendering

Photorealistic visualizations from your BIM model — interiors, exteriors, aerial views. BIM-accurate geometry ensures every proportion is true to the real building.

PhotorealisticDay · Dusk · NightBIM-Accurate
Workflow

From site scan to Revit model, step by step

01
Brief & Scope

We discuss your project, LOD, and timeline. Fixed-price quote within 24 hours. No surprises.

02
Site Scan

Professional-grade LiDAR capture — full-coverage point cloud data, efficiently and non-intrusively.

03
Processing

Point clouds registered, cleaned, colour-mapped. Preview delivered for approval before modeling begins.

04
Delivery

Final model in RVT, IFC, DWG, NWC. Handover walkthrough with 30-day post-delivery support.

Try it yourself

Walk the site.
Watch it appear.

This is how a LiDAR scan works. Move the scanner through the floor plan: every laser pulse that hits a wall becomes a measured point. Walls hidden from view stay dark until you reposition, just like on site. Reach 85% coverage, then convert the cloud into a clean BIM plan.

0
Points captured
0%
Wall coverage
1
Setup positions
0.0s
Scan time
Scanning · Plan viewX 0.00 · Y 0.00 m
Move your cursor or drag to scan
BIM model generated
Why DIZHONBIM

The full pipeline,
under one roof

Unlike companies that outsource either the scanning or the modeling, we handle the complete scan-to-BIM workflow in-house. Tighter quality control, faster delivery, single point of contact from first scan to final model.


We've worked on the same types of projects you're building. We understand coordination issues, construction tolerances, and what your team actually needs.

12 Years of Real AEC Projects

We understand coordination issues and tolerances from the inside.

Fixed Pricing, 24-Hour Quotes

No surprise invoices. You know exactly what you're paying before we start.

Scan to BIM Under One Roof

Complete workflow, single contact, tighter quality control throughout.

Deliverables Your Team Can Use

Structured, layered, named to your standards. Any format. No reformatting.

Projects

Residential villa — as-built floor plans from LiDAR scan

From scan
to precision drawing

Complete as-built floor plan documentation for a two-storey residential villa. LiDAR capture of both levels and site terrain, processed into a fully coordinated BIM model — dimensioned floor plans with room annotations extracted directly from point cloud data. Drag the slider to see the raw scan versus the finished BIM drawing.

Ground floor as-built BIM floor plan of a two-storey villa, produced from LiDAR point cloud
Ground floor LiDAR point cloud scan of a two-storey villa
BIM Model Point Cloud
As-Built · Ground Level · LOD 350
Ground Floor Plan

Open-plan living, kitchen, and terrace fully dimensioned from point cloud. All structural elements verified against scan data.

First floor as-built BIM floor plan with dimensions and room annotations
First floor LiDAR point cloud scan of a two-storey villa
BIM Model Point Cloud
As-Built · First Level · LOD 350
First Floor Plan

Bedroom and bathroom layout from high-density scan. All dimensions and section marks derived directly from the Revit model.

Project type
Residential Villa
2-Storey + Site
Deliverables
Floor Plans · BIM
Site Topography
LOD
LOD 350
Arch + Landscape
Scope
Scan · As-Built
2 Floors + Terrain
Testimonials what our clients say
★★★★★

The scan-to-BIM turnaround was extraordinary. We had a fully coordinated Revit model of our 18,000 sq ft commercial space within 48 hours of the site visit. Saved us weeks on our renovation timeline.

Michael R.
Principal Architect, Los Angeles
★★★★★

We used DIZHONBIM for pre-construction scanning on a complex MEP retrofit. Their clash detection report caught three major conflicts before we broke ground. The ROI was immediate.

Sarah T.
Project Manager, General Contractor
★★★★★

Incredibly detailed as-built documentation for our historic preservation project. The LOD 400 model gave our structural team exactly what they needed. Outstanding accuracy and professionalism.

David L.
MEP Engineer, Southern California
Investment

Scan to BIM pricing — transparent, fixed-price proposals

Scanning only
Point Cloud
$2K–$3K
per day on site
  • Professional LiDAR scanning
  • Registered point cloud
  • RCP / RCS / LAS / E57
  • Colourised point cloud
  • Basic QA report
Get quote →
Full coordination
Full BIM Package
CUSTOM
project-based pricing
  • Everything in Scan + BIM
  • MEP systems LOD 350+
  • Full clash detection report
  • Navisworks coordination file
  • COBie / FM-ready
Get quote →

Estimate your project cost

Enter your building size to get an instant estimate. Final quotes always fixed-price after a brief consultation.

Building size sq ft
Service type
Estimated project range
—
Final quote confirmed within 24 hours after a brief project consultation.
FAQ

Scan to BIM questions, answered

How much does scan to BIM cost in Los Angeles?

Scan + BIM (LiDAR scan plus a Revit model at LOD 200–350) typically runs $0.70–$1.20 per square foot. Scanning only is $2,000–$3,000 per day on site. Full MEP coordination packages are priced per project. Every quote is fixed-price and sent within 24 hours.

How fast can you deliver a BIM model?

The first deliverable is ready 48 hours after the site scan. Larger buildings and higher LOD models take longer; the exact schedule is confirmed in your fixed-price quote.

How accurate is your LiDAR scanning?

Our professional LiDAR scanning captures over one million points per second with accuracy under 5 cm, so the as-built model matches the real building.

What file formats do you deliver?

Models are delivered in Revit (RVT), IFC, DWG and Navisworks (NWC). Point clouds are delivered as RCP, RCS, LAS or E57.

Which areas do you serve?

We are based in Glendora and serve all of Los Angeles County and Southern California, including Downtown LA, Pasadena, Burbank, Santa Monica, Beverly Hills, West Hollywood, Culver City and Long Beach.

What level of detail (LOD) can you model?

We model from LOD 100 to LOD 500, covering architectural, structural and MEP systems, following ISO 19650 standards.

YOUR BUILDING,
MODELED IN 48 HOURS.
Los Angeles and Southern California  ·  Fixed-price quotes within 24 hours  ·  Call (626) 545-5094
Start your project →
Scan to BIM · LiDAR Scanning · Point Cloud to Revit · MEP Coordination · As-Built Documentation · Clash Detection · VDC Services · 3D Rendering · Scan to BIM · LiDAR Scanning · Point Cloud to Revit · MEP Coordination · As-Built Documentation · Clash Detection · VDC Services · 3D Rendering ·
Contact

Get a scan-to-BIM quote within 24 hours

Address
440 E Route 66
Glendora, CA 91740
Phone
(626) 545-5094
Email
Info@dizhonbim.com
Service Area
Los Angeles
Southern California
Or call (626) 545-5094 · email Info@dizhonbim.com

Service area: DIZHONBIM provides scan to BIM, LiDAR scanning, point cloud to Revit, as-built BIM modeling, MEP coordination and clash detection across Los Angeles County and Southern California (call (626) 545-5094) — Glendora, Pasadena, Burbank, Downtown LA, Hollywood, West Hollywood, Beverly Hills, Santa Monica, Culver City, Century City and Long Beach.